Por favor, use este identificador para citar o enlazar este ítem: https://hdl.handle.net/20.500.12104/81505
Título: Esquema de modulación vectorial modificado para un inversor trifásico de dos niveles utilizando algoritmo filtro notch adaptable
Autor: Morales Zunun, Jorge Antonio
Asesor: Zúñiga Haro, Pável
Alanís García, Alma Yolanda
Del Puerto Flores, Dunstano
Zúñiga Haro, Pável
Palabras clave: Ingenieria Electrica
Fecha de titulación: 31-ene-2019
Editorial: Biblioteca Digital wdg.biblio
Universidad de Guadalajara
Resumen: new structures for the conversion of electrical energy. This topic increases its importance due to the development of semiconductor devices and the great growth in the consumer market, looking, in most applications, for the optimization of the energy resources. In the case of inverters (dc/ac), they are devices that allow to transform voltage from cd to ac, and are widely used to inject current into the grid from electrical energy produced by nonconventional renewable energies. To activate the inverter devices, it is necessary to use a modulation scheme. According to pulse width modulation schemes, the space vector pulse width modulation is one of the most efficient due to its characteristics in the use of dc voltage, reduction of losses by switching and reduction of harmonic total distortion. However, the conventional space vector pulse width modulation technique presents disadvantages; some of which are treated in this work. This thesis presents a modification to the space vector pulse width modulation technique that is immune to low order harmonics, this is considered a test using rectifier as a non-linear load, caused by non-linear load, this in order to inject the low-order harmonics and also uses a single reference voltage signal, therefore, a single voltage sensor at the point of common coupling of the system. The modification consists of using a modified adaptive notch filter algorithm in order to obtain quadrature components, from a single input signal. The adaptive notch filter substitutes the stage of the Clarke transform that uses the conventional space vector pulse width modulation technique to obtain these quadrature components. Experimental results are shown using a laboratory prototype with the proposed modified space vector pulse width modulation technique, these results are compared with the implementation of the conventional space vector pulse width modulation technique.
URI: https://hdl.handle.net/20.500.12104/81505
https://wdg.biblio.udg.mx
Programa educativo: MAESTRIA EN CIENCIAS EN INGENIERIA ELECTRICA
Aparece en las colecciones:CUCEI

Ficheros en este ítem:
Fichero TamañoFormato 
MCUCEI10198.pdf
Acceso Restringido
7.78 MBAdobe PDFVisualizar/Abrir    Request a copy


Los ítems de RIUdeG están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.